These are instructions for setting up the PQConnect client software. This automatically protects outgoing connections from your machine to servers that support PQConnect.
Prerequisites: root on a Linux machine (Arch, Debian, Gentoo, Raspbian, Ubuntu). The software does not support other operating systems yet, sorry.
Quick start
Here is how to download, install, and run the PQConnect client software. Start a root shell and run the following commands:
cd /root
wget -m https://www.pqconnect.net/pqconnect-latest-version.txt
version=$(cat www.pqconnect.net/pqconnect-latest-version.txt)
wget -m https://www.pqconnect.net/pqconnect-$version.tar.gz
tar -xzf www.pqconnect.net/pqconnect-$version.tar.gz
cd pqconnect-$version
scripts/install-pqconnect
scripts/start-client-under-systemd
That's it: you're now running PQConnect.
Quick test
Try curl https://www.pqconnect.net/test.html;
or click on
https://www.pqconnect.net/test.html
from a browser running on the same machine.
Your machine running PQConnect will say
Looks like you're connecting with PQConnect. Congratulations!,
where a machine without PQConnect would say
Looks like you aren't connecting with PQConnect.
Also try connecting to a non-PQConnect server (for example, https://testwithout.pqconnect.net) to see that non-PQConnect connections work normally.
Detailed test
If you have dig installed:
Try dig +short www.pqconnect.net.
Your machine running PQConnect will say
pq1u1hy1ujsuk258krx3ku6wd9rp96kfxm64mgct3s3j26udp57dbu1.pqconnect.net.
10.43.0.2
(or possibly another 10.* address)
where a machine without PQConnect would say
pq1u1hy1ujsuk258krx3ku6wd9rp96kfxm64mgct3s3j26udp57dbu1.pqconnect.net.
131.155.69.126
(where 131.155.69.126 is the actual www.pqconnect.net IP address).
Try ping -nc 30 www.pqconnect.net.
Your machine will print bytes from lines such as
64 bytes from 10.43.0.2: icmp_seq=2 ttl=64 time=120 ms
again showing a 10.* address.
If you have a network sniffer such as tcpdump installed,
start sniffing the network for packets to and from IP address 131.155.69.126:
tcpdump -Xln host 131.155.69.126 > tcpdump-log &
Use wget to retrieve a web page via HTTP,
first without PQConnect and then with PQConnect:
wget -O test1.html http://testwithout.pqconnect.net/test.html
wget -O test2.html http://www.pqconnect.net/test.html
Then kill the tcpdump job and scroll through the tcpdump-log output.
You will see that the first connection uses TCP packets
to and from 131.155.69.126.80, meaning port 80 of IP address 131.155.69.126,
with an obviously unencrypted request
(search for GET and you will see GET /test.html, Host: testwithout.pqconnect.net, etc.)
and an obviously unencrypted response,
while the second connection uses
encrypted UDP packets
to and from port 42424 of IP address 131.155.69.126.
Non-systemd alternatives
Running the client under systemd is currently recommended because it applies some sandboxing, but you can instead run
scripts/run-client &
to more directly run the client.
Logs are then saved in pqconnect-log in the same directory.
If the computer reboots,
the client will not restart
unless you run scripts/run-client again.
Version: This is version 2024.12.26 of the "For users" web page.